We have a local offering of architectural masonry options for any project, including variations in texture, size and colors.
Trenwyth architectural blocks provide the ultimate design flexibility with a wide range of colors, sizes and finishes.
Artisan veneers provide unmatched beauty paired with design freedom, ease of installation and durability.
Quik-Brik single-wythe masonry offers the rich look of brick with one-step installation at a great value.
Our selection of upgrade options allows you to maximize energy efficiency, moisture management, acoustical comfort, aesthetics and streamline installation.
Amerimix offers factory blended mortar, grout, stucco and cement mixes to ensure consistency and quality.
Ground Face or Marble Face units are manufactured using a unique combination of colored, tightly mixed aggregate to create a smooth ground face finish. Units are manufactured with an integral water repellant.
Shotblasting produces a distinctive “weathered aggregate” surface for a unique finish referred to as either Weathered or Shot Blasted block. These masonry units are manufactured with moisture repellant to reduce moisture penetration and resist mildew.
Split Face masonry units are integrally colored pre-finished architectural concrete blocks with a beautiful, rough-hewn texture on one or more faces. Units are molded with two units attached face to face. The units are then mechanically split apart after having been cured, leaving the split face with a rough texture, similar to natural stone. The splitting process reveals the aggregates used in the block, so different aggregates will give different appearances and no two units are exactly alike.
Glazed face units are perfect for many commercial, retail, institutional and industrial applications with their impervious surface, flexible design options, and recycled content. Astra-Glaze SW+® glazed units are pre-faced architectural concrete masonry blocks with a thermoset glazing compound permanently molded on one or more faces. This glazing compound is cured and heat-treated in gas-fired tunnel kilns, thus becoming an integral part of the unit. The glazed facings are molded in individual molds, ensuring dimensional uniformity regardless of minor variations in the block.
TRENDSTONE® ground face masonry units are pre-finished integrally colored concrete block with one or more faces ground to expose the variegated colors of the natural aggregates. A factory-applied clear satin gloss acrylic accentuates the natural beauty of the aggregates and enhances moisture resistance. TRENDSTONE offers the enduring beauty of natural colored aggregates and the solid permanence of masonry.
Envision a pre-finished architectural concrete masonry unit with the same one-step installation, maintenance-free finish, easy-to-clean surface as TRENDSTONE, but with the look of a smooth terrazzo finish. That’s TRENDSTONE PLUS filled and polished ground face masonry units. TRENDSTONE PLUS offers the enduring beauty of natural colored aggregates and the solid permanence of masonry.
From top to bottom, Cordova Stone™ can economically supply you with the look and feel of natural limestone or cast stone. Cordova Stone units are high-density, pre-finished architectural concrete masonry units that achieve the look of natural stone by incorporating all-natural aggregates, delivering the prestigious appearance which has remained a desired look for centuries. This high-quality masonry product adds beauty and elegance to all residential, commercial and institutional projects.
Whether you prefer smooth texture and clean lines, or a bold chiseled face, Franklin Stone™ is the ideal product for the look of cast stone with modern manufactured masonry veneer advantages.
Mesastone® textured masonry units are pre-finished architectural concrete blocks manufactured with colored aggregates and pigment uniformly finished to an even texture. The MESASTONE textured surface resembles split face block but is more uniform, easier to lay-up and provides a straighter site line to the building.
Verastone® recycled ground face masonry units provide you with quality, recycled material that provides uncompromising high-performance, sustainable building design and application flexibility.
Verastone® Plus recycled filled and polished ground face masonry units provide the same one-step installation, maintenance-free finish, easy-to-clean surface as VERASTONE, but with the look of a smooth terrazzo finish.
Cinco Brick offers you a visual impact at an affordable price. Its unique height makes the installation similar to brick both in pattern and cost, while its choice of lengths and textures closely resemble natural stone.
From top to bottom, Cordova Stone™ can economically supply you with the look and feel of natural limestone. Cordova Stone 1-inch veneer is custom made with the look of natural stone and aggregate color consistent throughout the unit. This high-quality masonry product adds beauty and elegance to any project and gives you all the benefits of a modern masonry veneer.
Cordova Stone Accessories provide the perfect finishing touch for projects utiliziing Artisan Masonry Stone Veneer products. The line includes transitional sills, trim stone and a keystone made from high quality Cordova Stone, giving your next project and economical option for a high-end aesthetic.
Whether you prefer smooth texture and clean lines, or a bold chiseled face, Franklin Stone™ 1-inch stone veneers are the ideal product for the look of cast stone with modern manufactured masonry veneer advantages. Franklin Stone™ masonry block is made from a mixture of white portland cement combined with fine aggregates, resulting in a highly dense product with a texture similar to that of natural limestone. Unlike other masonry units, the aggregates do not show giving Franklin Stone™ 1-inch block its consistent, natural finish.
Hillcrest™ Stone is one of the newest innovations to the Artisan Masonry Stone Veneers® line. Boasting an aesthetic and modular system that emulates stacked stone, Hillcrest is designed to fit with tight dimensional tolerance which reduces installation time. This new lightweight offering gives even more options to maximize aesthetics and performance while minimizing installation time and cost.
Kensley Stone is one of the newest thin veneers to be added to the Artisan Masonry Stone Veneers® family of products. Boasting a traditional ashlar pattern with a 3/8” mortar joint, Kensley Stone is designed to reflect the timeless aesthetics of natural limestone. This lightweight veneer offers a new texture and upscale look while minimizing install time and cost.
Lamina® Stone emulates a stacked stone appearance while making a bold statement. This multi-length stone offers a lot of benefits due to its unique installation and design. The original texture and color choices bring out the best in every project. Lamina may be used on the entire façade or just to accentuate certain architectural elements such as wall sections or skirting.
Waterford Stone® evokes the natural, time-honed look of hand-cut stone with its antiqued edges and textured face while featuring the modern benefits of manufactured masonry. Waterford Stone® grants unparalleled design flexibility with its diverse array of sizes and colors, employing Oldcastle’s unique multiple color blending system that will last the life of your home. Whether your architectural style is elegant sophistication or old-world class, Waterford Stone® provides the perfect exterior finish.
Westpeak is another thin veneer in the Artisan Masonry Stone Veneers line to provide additional options to enhance your project. Boasting a patter than provides a horizontal course at 2 ½” and 3” heights, this dry stack product is designed to fit with tight dimensional tolerance which reduces installation time.
Founders Finish offers all the benefits of Quik-Brik with a unique striated finish to give your project a special aesthetic.
Harvard-Brik Series offers all of the benefits of Quik-Brik with a unique “blended” color palette using an integral color process to accentuate your building & provide color fastness.
When national retailers require a quality product that meets their time and budget constraints without sacrificing aesthetics or durability, they turn to Quik-Brik®. Architects & builders choose Quik-Brik time & time again for it’s first rate appearance and history of dependability. Quik-Brik gives the rich look of brick in one-step, cost effective solution.
Acoust-Wal® sound-absorbing masonry units are your acoustical and aesthetic solution in one product. Whether it’s a school gym, lecture hall or performance arts center, Acousta-Wal is your indoor/outdoor solution to sound absorption and control. Its unique design controls sound transmission as it absorbs sound at all frequencies, even the difficult-to-control low frequencies.
InsulTech™ ICMU is a complete thermally broken insulated masonry system which includes a full complement of masonry units. Insultech offers high thermal efficiency in an innovative design combining a pre-assembled structural masonry unit, molded EPS insulation insert and thin veneer face. It provides design flexibility, installation efficiency and is available in both standard finishes as well as Trenwyth® colors and textures.
Every component of the EnduraMax® High-Performance Wall System is specifically engineered to work together, forming a total cladding solution that adds superior energy performance. The complete system offers an insulation value of R9.2 steady state. This extra layer of thermal protection means building owners can benefit from a cladding system that helps meet and exceed today’s demanding energy codes.
Change the aesthetics of your next project by adding Oldcastle’s filled and polished or high polished options to your architectural block or CMU. This performance upgrade option allows you to maintain all the benefits of a pre-finished architectural concrete masonry unit—one step installation, maintenance-free and easy-to-clean—but with the look of a smooth terrazzo finish!
Monumental Series over-sized masonry units are large, specialty sized pre-finished architectural concrete masonry units used to create large-scale walls, columns and arches of monumental proportion. These units are constructed from integrally colored concrete with one or more faces ground to expose the variegated colors of the natural aggregates.
Amerimix has been producing high quality products for almost 20 years. What started as a regional Florida business has grown to become a national player in preblended, cementitious bagged materials. Our driving principal, to manufacture high performing products that take the risk and guesswork out of jobsite mixing, is based on a process that combines formula development in our state-of-the-art laboratory with hands on feedback from masons on the job. This process combined with high quality raw materials and factory controlled blending guarantees top quality preblended products on every job. With Amerimix there is Pride in Every Bag™.
Echelon Masonry products are manufactured regionally. For best results, enter the zip code where your project is located.