Full Bed Veneer
Availability
RISE ABOVE
Elevating Design with Veneers
See our shapes catalog, view 3D mockups and render at wall scale with our Echelon Masonry Visualizer.
TIPS & TECHNIQUES
Thin and Full Bed Veneer Masonry Solutions
Replace natural stone with either thin or full bed veneers on your next project. Veneers are easy to install and come in an array of colors and textures to serve as a versatile design element.
Create an authentic masonry look
Full bed masonry veneer delivers the depth, dimension and the timeless appearance of traditional masonry for a wide range of architectural styles.
Build for lasting performance
Designed for durable exterior applications, full bed veneer provides a long-lasting masonry finish that can stand up to demanding environments.
Design with greater flexibility
Explore a range of colors, textures, shapes and profiles to create distinctive façades, accents and other architectural details.
Frequently asked questions about full bed veneers
The main difference between anchored and adhered masonry veneer is how the veneer is supported and attached to the building. Anchored masonry veneer is heavier and requires a wall-tie system to support and secure the veneer to a backup wall, such as wood, steel or concrete. Adhered masonry veneer weighs 15 pounds or less per square foot and can be bonded directly to a properly prepared substrate without a separate wall-tie system. The appropriate system depends on the veneer, wall assembly and project requirements.
Yes. Full bed depth veneer can be used with wood or metal stud backup walls, as well as other properly designed backup systems. The type of backup system does not determine whether full bed veneer can be used. The complete wall assembly should be properly designed to support the veneer and account for anchoring, drainage and other project-specific requirements.
Yes. Manufactured stone veneer can often be used around a fireplace to create a natural stone appearance. However, the veneer should not be exposed directly to flame or used as a return into the firebox unless specifically approved for that application. Always follow the veneer manufacturer’s instructions and applicable building and fire codes.
Control joint spacing is one of the most critical considerations when designing a masonry wall. For full bed depth veneer installations, control joints should be spaced no more than 25 feet apart. Proper placement helps accommodate movement within the masonry and support the long-term performance of the wall system. Refer to CMHA.org for additional guidance on control joint design, spacing and placement.
Full bed depth stone veneer is typically 3 to 5 inches in nominal masonry thickness. This greater depth distinguishes it from thin veneer and provides the substantial appearance and dimension associated with traditional masonry construction. Echelon offers full bed veneer options in a range of colors, textures and profiles to support a variety of architectural styles and project designs.
There are several acceptable masonry veneer anchor and wall-tie systems available. The right system will depend on factors such as the veneer type, backup wall and specific project requirements. Proper anchor selection helps securely support the veneer and contributes to the long-term performance of the masonry wall system. Contact your local Echelon representative or visit the Technical Resources section of CMHA.org for additional guidance on masonry veneer anchors and wall ties.
Yes. Depending on its shape and application, a specialty block can be classified as an architectural CMU or a veneer. Specialty blocks typically feature distinctive shapes, patterns, textures or other design elements, while architectural CMU is a broader category of concrete masonry used to achieve both functional and aesthetic goals. Some Echelon products can fall into both categories depending on how they are designed and used.
Brick weep holes are openings near the base of a masonry veneer or at other flashing locations that allow water collected within the wall cavity to drain to the exterior. Weep holes work with flashing to help direct moisture out of the wall and may also provide ventilation that supports drying. Keeping weep holes unobstructed is important for proper masonry water management.
Common laying patterns for full bed veneers include Fieldstone, Ledgestone, Running Bond, Stacked Bond and Ashlar. Each pattern arranges masonry units differently to create a distinct architectural look, from the more varied appearance of Fieldstone to the clean, linear layout of Running Bond or Stacked Bond. Echelon full bed veneers can be used with different laying patterns to help architects and designers achieve the desired texture, scale and visual character for a project.
Brick veneer is a thin layer of brick used as a facing on a wall. It can be used in interior or exterior applications and is attached to a wood, steel or concrete structural frame using metal ties. Unlike a load-bearing brick wall, brick veneer primarily provides the appearance of traditional brick while the structural frame supports the building. This allows designers to incorporate the color, texture and character of brick into a variety of wall assemblies.
CMHA stands for the Concrete Masonry & Hardscapes Association, which is a trade association representing the concrete masonry, hardscape and manufactured stone veneer industries. CMHA provides technical resources, education, research and industry guidance for producers, contractors, architects, engineers and other masonry professionals.
Manufactured stone veneer (MSV) is a non-load-bearing masonry product designed to replicate the appearance of natural stone. This product is typically made from cementitious materials, aggregates, and pigments to create a range of stone colors, textures, and profiles. Terms such as faux stone and stone cladding may also be used to describe manufactured products or wall finishes that create the appearance of natural stone. Cast stone veneer is another manufactured masonry option designed to resemble natural cut stone, such as limestone. Echelon offers adhered and anchored masonry veneer options that provide the look of natural stone in a durable, design-flexible system.
The primary difference between brick veneer and Quik-Brik is their structural function. Brick veneer is non-load bearing, meaning it serves as cladding while the building’s structural frame supports the weight. Quik-Brik is load bearing, so it functions as part of the building’s structural wall system. Quik-Brik provides the aesthetic appeal of traditional clay brick but is installed as single-wythe masonry, combining structure and finished appearance in one wall system at a cost-effective price point.
The Mason Contractors Association of America (MCAA) is a national trade association representing mason contractors. MCAA supports the masonry industry through education and training, advocacy, safety initiatives, workforce development and promotion of masonry construction.
Travertine masonry is manufactured masonry designed to recreate the appearance of natural travertine stone. This product typically emphasizes the warm color variation, texture and linear character associated with travertine. Echelon Trattino provides a natural travertine aesthetic in both full-depth veneer and structural masonry units.
Echelon offers several masonry veneer products designed to provide the natural look of limestone, including Cordova Stone, Franklin Stone, Aria Slim and Aria Stone. These options offer different profiles, textures and installation methods, giving architects and designers flexibility to achieve a limestone-inspired aesthetic while benefiting from the durability and design versatility of manufactured masonry veneer.
The appropriate cleaner depends on the specific Echelon masonry product. Different masonry materials and finishes may have different cleaning requirements, so always refer to the cleaning section of the product specification before selecting or applying a cleaner. Following the product-specific recommendations can help remove dirt or stains without affecting the appearance or finish of the masonry.
Let’s get to work
Masonry solutions for contractors, builders, planners, architects and engineers.
Have questions about masonry performance, products, specifications and more? We’re here to help.
