Home / Blog / Reducing Potential for Efflorescence

Reducing Potential for Efflorescence

A white, powdery deposit across an otherwise clean masonry façade can be frustrating, but understanding why efflorescence occurs is the first step toward reducing its potential. 

What Is Efflorecescence?

Efflorescence occurs when moisture carries soluble salts within masonry materials to the surface. As the moisture evaporates, the salts remain behind as a visible residue. While efflorescence can affect the appearance of masonry, it does not affect structural performance. 

Three conditions are necessary for efflorescence to occur: 

  • Soluble compounds must be present within the masonry materials. 
  • Moisture must dissolve and transport the soluble compounds. 
  • Evaporation must occur after the solution reaches the surface, leaving the salts behind. 

Remove one of these conditions and the cycle is interrupted. 

Control The Moisture

Because some soluble salts naturally exist within masonry materials, moisture is generally the factor designers and contractors can control most effectively. 

Reducing water intrusion begins with good wall design. Details should direct water away from horizontal surfaces, openings and other vulnerable areas. Proper flashing and drainage help move water out of wall assemblies rather than allowing it to accumulate. 

Integral water repellants can provide another layer of protection. Echelon masonry units can be manufactured with integrated water-repellant technology that inhibits moisture migration through the block. When paired with Amerimix preblended mortar formulated with a water-repellent admixture, the system further reduces the pathways through which water can move across the wall. 

Good Jobsite Practices Matter

Efflorescence prevention does not stop with the specification. Construction practices can introduce moisture and contaminants into masonry before the wall is even complete. 

  • Store masonry units, sand and cementitious materials off the ground and protect them from rain. 
  • Cover unfinished walls at the end of the workday to limit water entering open cores. 
  • Use clean, potable mixing water to avoid introducing additional salts. 
  • Properly waterproof masonry below grade and limit contact with moisture-containing soils. 
  • Design sills, caps and wall tops to shed water rather than allowing it to collect. 
  • Control interior humidity and condensation where high moisture levels are expected. 

These principles remain consistent with current industry guidance for controlling efflorescence in concrete masonry. 

Address The Source Before The Stain

Not all types of efflorescence mean the same thing. 

Light deposits that appear shortly after construction may develop as moisture naturally evaporates from new masonry and can fade with normal weathering. Persistent streaking or deposits that reappear in specific areas, however, can indicate an ongoing source of water intrusion. Before cleaning the surface, the source of that moisture should be identified and corrected. 

Efflorescence is easiest to manage before it appears. Good design, thoughtful material selection, proper moisture protection and careful construction all help reduce the conditions that allow salts to reach the surface in the first place. 

For masonry that is intended to look good for decades, keeping water under control is one of the best places to start. 

Related Content

  • A masonry wall gives the appearance of brick

    Cost-Effectiveness of Masonry

    One of the longstanding perceptions surrounding concrete-based construction is that greater durability and fire resistance come with…

  • Is Concrete Block Better Than Wood Frame?

    Cost Savings & Availability Make Concrete Masonry Ideal for Demanding Building Applications