Home / Resiliency / Page 2
FAQs: Resiliency
Sort By
Search
What is ground face masonry?
Ground face masonry is concrete masonry that has been mechanically ground on its exposed face to create a smooth, finished surface and reveal the natural aggregate within the unit. Compared with split face masonry, ground face CMU has a smoother, more refined appearance. Echelon offers ground face products in a range of colors and finishes for architectural applications.
What is manufactured stone veneer?
Manufactured stone veneer (MSV) is a non-load-bearing masonry product designed to replicate the appearance of natural stone. This product is typically made from cementitious materials, aggregates, and pigments to create a range of stone colors, textures, and profiles. Terms such as faux stone and stone cladding may also be used to describe manufactured products or wall finishes that create the appearance of natural stone. Cast stone veneer is another manufactured masonry option designed to resemble natural cut stone, such as limestone. Echelon offers adhered and anchored masonry veneer options that provide the look of natural stone in a durable, design-flexible system.
What is a concrete fence block?
A concrete fence block is a concrete masonry unit designed for constructing durable fence or privacy wall systems. Depending on the wall design, hollow units may accommodate reinforcement and grout to create a stronger masonry assembly. Concrete fence blocks can also provide the durability and low-maintenance qualities associated with concrete masonry.
What is ashlar masonry?
Ashlar masonry is a design pattern that uses rectangular masonry units arranged in a structured layout that resembles traditionally cut stone construction. The pattern can incorporate units of different lengths and heights to create visual variation while maintaining defined horizontal lines. Echelon Kensley Stone, for example, features a traditional ashlar pattern with a chiseled finish.
What is travertine masonry?
Travertine masonry is manufactured masonry designed to recreate the appearance of natural travertine stone. This product typically emphasizes the warm color variation, texture and linear character associated with travertine. Echelon Trattino provides a natural travertine aesthetic in both full-depth veneer and structural masonry units.
Can you use stone veneer for a fireplace?
Yes. Manufactured stone veneer can often be used around a fireplace to create a natural stone appearance. However, the veneer should not be exposed directly to flame or used as a return into the firebox unless specifically approved for that application. Always follow the veneer manufacturer’s instructions and applicable building and fire codes.
What type of cleaner should I use for Echelon Masonry?
The appropriate cleaner depends on the specific Echelon masonry product. Different masonry materials and finishes may have different cleaning requirements, so always refer to the cleaning section of the product specification before selecting or applying a cleaner. Following the product-specific recommendations can help remove dirt or stains without affecting the appearance or finish of the masonry.
What is the difference between lightweight, medium-weight and normal-weight blocks?
The difference between lightweight, medium-weight and normal-weight concrete masonry units (CMUs) is based on the density of the concrete used to manufacture them. According to ASTM C90 specifications for load-bearing concrete masonry units, lightweight CMUs have a density of less than 105 pounds per cubic foot, medium-weight CMUs range from 105 to less than 125 pounds per cubic foot and normal-weight CMUs have a density of 125 pounds per cubic foot or more. These classifications help distinguish CMUs based on concrete density and can be considered when selecting masonry units for specific project requirements.
How is a thin stacked stone veneer installed?
Thin stacked stone veneer is installed as a thin, adhered veneer, with the units placed closely together so there is little to no visible mortar between them. This installation method creates the clean, layered appearance associated with stacked stone while maintaining the lighter profile of thin masonry veneer. Proper substrate preparation and installation are important to support the appearance and long-term performance of the finished veneer.
What are some of the laying patterns for full bed veneers?
Common laying patterns for full bed veneers include Fieldstone, Ledgestone, Running Bond, Stacked Bond and Ashlar. Each pattern arranges masonry units differently to create a distinct architectural look, from the more varied appearance of Fieldstone to the clean, linear layout of Running Bond or Stacked Bond. Echelon full bed veneers can be used with different laying patterns to help architects and designers achieve the desired texture, scale and visual character for a project.
How is a thin veneer installed?
Thin masonry veneer is installed by adhering the veneer to a properly prepared substrate using an appropriate mortar system. Because installation requirements can vary based on the veneer, substrate and project conditions, proper surface preparation, mortar selection, flashing and water management are important for long-term performance. For detailed installation requirements and best practices, refer to the Manufactured Stone Veneer (MSV) Installation Guide available through CMHA.org.
How thick is full bed veneer stone veneer?
Full bed depth stone veneer is typically 3 to 5 inches in nominal masonry thickness. This greater depth distinguishes it from thin veneer and provides the substantial appearance and dimension associated with traditional masonry construction. Echelon offers full bed veneer options in a range of colors, textures and profiles to support a variety of architectural styles and project designs.
Can a full bed depth veneer be used with a wood or metal stud back-up wall?
Yes. Full bed depth veneer can be used with wood or metal stud backup walls, as well as other properly designed backup systems. The type of backup system does not determine whether full bed veneer can be used. The complete wall assembly should be properly designed to support the veneer and account for anchoring, drainage and other project-specific requirements.
How far apart should the control joints be spaced in a full bed depth veneer installation?
Control joint spacing is one of the most critical considerations when designing a masonry wall. For full bed depth veneer installations, control joints should be spaced no more than 25 feet apart. Proper placement helps accommodate movement within the masonry and support the long-term performance of the wall system. Refer to CMHA.org for additional guidance on control joint design, spacing and placement.
What sizes do CMU blocks come in?
Architectural CMU is available in a wide variety of sizes and shapes to accommodate different structural and design needs. Common nominal CMU sizes include 4 x 8 x 16 inches, 6 x 8 x 16 inches, 8 x 8 x 16 inches, 10 x 8 x 16 inches and 12 x 8 x 16 inches. Echelon also offers numerous colors, textures and finishes, giving architects and designers flexibility when specifying concrete masonry. Available CMU sizes, shapes, colors and finishes vary by product and location, so refer to your Echelon region for specific product availability.
What is an architectural CMU?
An architectural concrete masonry unit (CMU) typically refers to an open-celled masonry unit that can be used in structural or non-structural applications. Architectural CMU combines the performance of concrete masonry with a range of colors, textures, shapes and finishes, allowing it to serve as both a functional building material and a visible design element.
What are the benefits of a specialty finish cmu block (ground face, polish face, shot blast)?
Specialty finish CMU, such as ground face, polish face and shot blast, exposes the natural aggregate matrix within the block to create added color, texture and visual interest. These finishes can also provide a more consistent appearance across the wall, helping minimize the possibility of visible shading. Echelon specialty finish CMU gives architects and designers more options for creating distinctive masonry walls while maintaining the durability and performance of concrete masonry.
What are decorative or specialty concrete blocks?
Decorative or specialty concrete blocks are masonry units designed with distinctive shapes, patterns, textures, finishes or geometric voids that add visual interest to a wall or building. Examples can include breeze block, split face, scored block and chisel face designs. These specialty blocks combine the durability of concrete masonry with architectural details that give designers greater flexibility to incorporate texture, pattern and dimension into masonry designs.
PROJECT SUPPORT
With You from Inspiration through Installation
Echelon supports architects and specifiers throughout the project journey, with the tools, expertise and resources to explore ideas, specify with confidence and help bring masonry designs to life.
Build with masonry
Let’s get to work
Masonry solutions for contractors, builders, planners, architects and engineers.
Have questions about masonry performance, products, specifications and more? We’re here to help.



